Prism Molds

These corrosion-resistant steel molds are available in single or two-gang configurations. Each consists of a base plate, endplates, and removable partitions, and is designed for use with Prism Length Change Gauge Studs when casting samples.

• Single Prism Mold, 1x1x10in forms a single specimen with an outside length of 11.625in (296mm) from the outside end of Gauge Studs.
• 2-Gang Prism Mold, 1x1x10in forms two specimens and is available in steel or stainless steel models with an outside length of 11.625in (296mm) from the outside end of Gauge Studs.
• 2-Gang Prism Mold, 2x2x10in with an outside length of 11.625in (296mm) from the outside end of Gauge Studs. For molding two specimens.
• Single Prism Mold, 3x3x10in with an outside length of 11.625in (296mm) from the outside end of Gauge Studs. For forming a single 10in mold.
• Prism Length Change Gauge Studs made of 316 stainless steel is threaded into prism molds and cast into specimens for precise measurements in Length Comparator.

For more information on Prism Molds, here are our related blogs:

• Cement Testing Resource Guide: Methods & Equipment